PANEL SYSTEMS

Panel systems configured for project requirements.

Review panel systems around the use environment, required performance, fabrication and installation conditions. WIVICS brings these requirements together to configure a system for its intended application.

  1. Start with the conditions
  2. Review the system
  3. Configure the solution

01 / AVAILABLE SYSTEMS

B Review the system

Available Panel Systems

Start with a material system, then review its configurations and the project conditions it needs to meet.

Return to project pathway

02 / SELECTION CRITERIA

A Start with the conditions

Choose by Project Requirement

Define the conditions first. These six criteria guide the review of a suitable material and configuration.

Environment
Interior, exterior and exposure conditions.
Moisture
Wet, humid and cleaning-intensive areas.
Impact
Traffic, contact and service demands.
Fire
Project-specific compliance requirements.
Surface
Colour, texture and maintenance priorities.
Fabrication
Thickness, edge, machining and fixing needs.

For Tropical and High-Humidity Markets, describe the actual exposure, cleaning and installation conditions for review.

Return to project pathway

03 / TOTAL SOLUTION

C Configure the solution

From Project Conditions to a Total Solution

Material selection is the starting point. WIVICS connects panel configuration, engineering review and execution coordination around the project.

  1. PROJECT INPUT

    Define the conditions

    Use environment, required performance and installation context.

  2. SYSTEM SELECTION

    Select and configure

    Material, surface, grade, thickness and fabrication interfaces.

  3. TECHNICAL REVIEW

    Connect the requirements

    Application engineering and performance review, considered together.

  4. EXECUTION COORDINATION

    Carry it into the project

    Coordinate application, fabrication and installation conditions.

THE CONNECTED OUTCOME

Configured Panel Solution

The material, its interfaces and the requirements for execution brought together.

  • Application
  • Fabrication
  • Installation coordination
Return to project pathway

DISCUSS A PROJECT

Start with the project requirements.

Share the conditions. WIVICS will review a suitable panel system configuration around your project.

  • Use environment
  • Required performance
  • Fabrication conditions
  • Installation conditions
Discuss a Project